Custom Tie & Accessory — Georgette with Hot Foil Stamping
We supply tie & accessory to brands, retailers and uniform programmes, made in Georgette with hot foil stamping for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 7 cm classic |
| Type | bow tie |
| Material | Georgette |
| Construction / finish | Hot Foil Stamping |
| Colour options | 16 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 3000 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | UKCA and REACH documentation; EN 71 part 3 for decorative components |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Debossing — available on Georgette, quoted per position and per colour.
- Edge Painting — available on Georgette, quoted per position and per colour.
- Water-Repellent Finish — available on Georgette, quoted per position and per colour.
- Powder Coating — available on Georgette, quoted per position and per colour.
- Embroidery — available on Georgette, quoted per position and per colour.
- Yarn Dyeing — available on Georgette, quoted per position and per colour.
- Hot Foil Stamping — available on Georgette, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Georgette
- Construction sample with hot foil stamping applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your tie & accessory programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
