Custom Tie & Accessory — Iron with Hand-Rolled Hem
We supply tie & accessory to brands, retailers and uniform programmes, made in Iron with hand-rolled hem for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 8 cm |
| Type | bow tie |
| Material | Iron |
| Construction / finish | Hand-Rolled Hem |
| Colour options | 12 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; CPSIA lead and phthalate testing |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Pleating — available on Iron, quoted per position and per colour.
- Brushed Finish — available on Iron, quoted per position and per colour.
- Rubber Coating — available on Iron, quoted per position and per colour.
- Knitted Structure — available on Iron, quoted per position and per colour.
- Offset Printing — available on Iron, quoted per position and per colour.
- Woven Jacquard — available on Iron, quoted per position and per colour.
- Edge Painting — available on Iron, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Iron
- Construction sample with hand-rolled hem applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
