Custom Clothing Accessory in Mother of Pearl with Injection Moulding for Outerwear and Jacket Programmes

Custom Clothing Accessory — Mother of Pearl with Injection Moulding

We supply clothing accessory to brands, retailers and uniform programmes, made in Mother of Pearl with injection moulding for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.

The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Sanforising — available on Mother of Pearl, quoted per position and per colour.
• Dye-Sublimation Printing — available on Mother of Pearl, quoted per position and per colour.
• Digital Printing — available on Mother of Pearl, quoted per position and per colour.
• Laser Cutting — available on Mother of Pearl, quoted per position and per colour.
• Black Oxide — available on Mother of Pearl, quoted per position and per colour.
• Hand-Rolled Hem — available on Mother of Pearl, quoted per position and per colour.
• Anti-Static Finish — available on Mother of Pearl, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Mother of Pearl
3. Construction sample with injection moulding applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.