Custom Tie & Accessory — Mesh with Anti-Rust Treatment
We supply tie & accessory to brands, retailers and uniform programmes, made in Mesh with anti-rust treatment for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is interlining recovery, so the knot springs back after a day of wear — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 9 cm wide |
| Type | clip-on tie |
| Material | Mesh |
| Construction / finish | Anti-Rust Treatment |
| Colour options | 8 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; GRS recycled content claim |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Injection Moulding — available on Mesh, quoted per position and per colour.
- Fringe Finish — available on Mesh, quoted per position and per colour.
- Flatlock Seam — available on Mesh, quoted per position and per colour.
- Hot Foil Stamping — available on Mesh, quoted per position and per colour.
- Powder Coating — available on Mesh, quoted per position and per colour.
- Hand-Rolled Hem — available on Mesh, quoted per position and per colour.
- Screen Printing — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with anti-rust treatment applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same interlining recovery.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your tie & accessory programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
