Custom Tie & Accessory — Microfibre with Ultrasonic Welding
We supply tie & accessory to brands, retailers and uniform programmes, made in Microfibre with ultrasonic welding for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 8 cm |
| Type | tie bar |
| Material | Microfibre |
| Construction / finish | Ultrasonic Welding |
| Colour options | 24 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; EN 71 part 3 for decorative components |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Heat-Cut Edge — available on Microfibre, quoted per position and per colour.
- Crochet — available on Microfibre, quoted per position and per colour.
- Fringe Finish — available on Microfibre, quoted per position and per colour.
- Soft Enamel Fill — available on Microfibre, quoted per position and per colour.
- Pleating — available on Microfibre, quoted per position and per colour.
- Smocking — available on Microfibre, quoted per position and per colour.
- Digital Printing — available on Microfibre, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Microfibre
- Construction sample with ultrasonic welding applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
