Custom Tie & Accessory — Aluminium with UV Printing
We supply tie & accessory to brands, retailers and uniform programmes, made in Aluminium with uv printing for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is pattern matching across the fold and the tip — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 5 cm skinny |
| Type | knit tie |
| Material | Aluminium |
| Construction / finish | UV Printing |
| Colour options | 16 shades, Pantone matched |
| Packing | gift box |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; colour fastness to washing, rubbing and light |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Binding Tape Edge — available on Aluminium, quoted per position and per colour.
- Screen Printing — available on Aluminium, quoted per position and per colour.
- Warp Knitting — available on Aluminium, quoted per position and per colour.
- Brushed Finish — available on Aluminium, quoted per position and per colour.
- Piece Dyeing — available on Aluminium, quoted per position and per colour.
- Mercerising — available on Aluminium, quoted per position and per colour.
- Edge Painting — available on Aluminium, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Aluminium
- Construction sample with uv printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pattern matching across the fold and the tip.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
