Custom Tie & Accessory — Nylon Taslan with Mercerised Finish
We supply tie & accessory to brands, retailers and uniform programmes, made in Nylon Taslan with mercerised finish for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 8 cm |
| Type | tie clip |
| Material | Nylon Taslan |
| Construction / finish | Mercerised Finish |
| Colour options | 8 shades, Pantone matched |
| Packing | carded |
| MOQ | 3000 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Heat Transfer Printing — available on Nylon Taslan, quoted per position and per colour.
- Offset Printing — available on Nylon Taslan, quoted per position and per colour.
- Hard Enamel Fill — available on Nylon Taslan, quoted per position and per colour.
- Paint Spray — available on Nylon Taslan, quoted per position and per colour.
- Piece Dyeing — available on Nylon Taslan, quoted per position and per colour.
- Anti-UV Finish — available on Nylon Taslan, quoted per position and per colour.
- Heat-Cut Edge — available on Nylon Taslan, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Nylon Taslan
- Construction sample with mercerised finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
