Custom Tie & Accessory — Polycarbonate with Paint Spray
We supply tie & accessory to brands, retailers and uniform programmes, made in Polycarbonate with paint spray for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 9 cm wide |
| Type | tie bar |
| Material | Polycarbonate |
| Construction / finish | Paint Spray |
| Colour options | 12 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 3000 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; colour fastness to washing, rubbing and light |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Laser Engraving — available on Polycarbonate, quoted per position and per colour.
- Binding Tape Edge — available on Polycarbonate, quoted per position and per colour.
- Hard Enamel Fill — available on Polycarbonate, quoted per position and per colour.
- Dye-Sublimation Printing — available on Polycarbonate, quoted per position and per colour.
- Anti-Rust Treatment — available on Polycarbonate, quoted per position and per colour.
- Piece Dyeing — available on Polycarbonate, quoted per position and per colour.
- Hot Foil Stamping — available on Polycarbonate, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polycarbonate
- Construction sample with paint spray applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
Which compliance documents do you provide?
We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
