Custom Tie & Accessory — Nickel-Free Alloy with Rib Knit
We supply tie & accessory to brands, retailers and uniform programmes, made in Nickel-Free Alloy with rib knit for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is interlining recovery, so the knot springs back after a day of wear — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 7 cm classic |
| Type | skinny tie |
| Material | Nickel-Free Alloy |
| Construction / finish | Rib Knit |
| Colour options | 8 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; CPSIA lead and phthalate testing |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Soft Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
- Hot Foil Stamping — available on Nickel-Free Alloy, quoted per position and per colour.
- Applique — available on Nickel-Free Alloy, quoted per position and per colour.
- Sequin Stitching — available on Nickel-Free Alloy, quoted per position and per colour.
- Screen Printing — available on Nickel-Free Alloy, quoted per position and per colour.
- Tie Dyeing — available on Nickel-Free Alloy, quoted per position and per colour.
- Sanforising — available on Nickel-Free Alloy, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Nickel-Free Alloy
- Construction sample with rib knit applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same interlining recovery.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
