Custom Tie & Accessory in Pashmina Blend with Heat Transfer Printing for Outerwear and Jacket Programmes

Custom Tie & Accessory — Pashmina Blend with Heat Transfer Printing

We supply tie & accessory to brands, retailers and uniform programmes, made in Pashmina Blend with heat transfer printing for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Mercerising — available on Pashmina Blend, quoted per position and per colour.
• Hand-Rolled Hem — available on Pashmina Blend, quoted per position and per colour.
• Dye-Sublimation Printing — available on Pashmina Blend, quoted per position and per colour.
• UV Printing — available on Pashmina Blend, quoted per position and per colour.
• Rubber Coating — available on Pashmina Blend, quoted per position and per colour.
• Stamping — available on Pashmina Blend, quoted per position and per colour.
• Die-Casting — available on Pashmina Blend, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Pashmina Blend
3. Construction sample with heat transfer printing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your tie & accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.