Custom Tie & Accessory — French Terry with Woven Jacquard
We supply tie & accessory to brands, retailers and uniform programmes, made in French Terry with woven jacquard for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is interlining recovery, so the knot springs back after a day of wear — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 7 cm classic |
| Type | tie clip |
| Material | French Terry |
| Construction / finish | Woven Jacquard |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 500 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | UKCA and REACH documentation; salt spray test for metal finishes |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Yarn Dyeing — available on French Terry, quoted per position and per colour.
- Tie Dyeing — available on French Terry, quoted per position and per colour.
- Woven Jacquard — available on French Terry, quoted per position and per colour.
- Embossing — available on French Terry, quoted per position and per colour.
- Laser Cutting — available on French Terry, quoted per position and per colour.
- Hard Enamel Fill — available on French Terry, quoted per position and per colour.
- Quilting — available on French Terry, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed French Terry
- Construction sample with woven jacquard applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same interlining recovery.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
