Custom Tie & Accessory — EVA Foam with Digital Printing
We supply tie & accessory to brands, retailers and uniform programmes, made in EVA Foam with digital printing for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is interlining recovery, so the knot springs back after a day of wear — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 7 cm classic |
| Type | knit tie |
| Material | EVA Foam |
| Construction / finish | Digital Printing |
| Colour options | 16 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 3000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | GSO conformity with Arabic labelling; CPSIA lead and phthalate testing |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Space Dyeing — available on EVA Foam, quoted per position and per colour.
- Dye-Sublimation Printing — available on EVA Foam, quoted per position and per colour.
- Soft Enamel Fill — available on EVA Foam, quoted per position and per colour.
- Anti-Pilling Finish — available on EVA Foam, quoted per position and per colour.
- Brushed Finish — available on EVA Foam, quoted per position and per colour.
- Stamping — available on EVA Foam, quoted per position and per colour.
- Jacquard Weave — available on EVA Foam, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed EVA Foam
- Construction sample with digital printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same interlining recovery.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
