Custom Tie & Accessory — Polyethylene (PE) with Placement Printing
We supply tie & accessory to brands, retailers and uniform programmes, made in Polyethylene (PE) with placement printing for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is pattern matching across the fold and the tip — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 7 cm classic |
| Type | tie bar |
| Material | Polyethylene (PE) |
| Construction / finish | Placement Printing |
| Colour options | 16 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | UKCA and REACH documentation; EN 71 part 3 for decorative components |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Rubber Coating — available on Polyethylene (PE), quoted per position and per colour.
- Dye-Sublimation Printing — available on Polyethylene (PE), quoted per position and per colour.
- Mercerising — available on Polyethylene (PE), quoted per position and per colour.
- Enzyme Wash — available on Polyethylene (PE), quoted per position and per colour.
- Heat-Cut Edge — available on Polyethylene (PE), quoted per position and per colour.
- Offset Printing — available on Polyethylene (PE), quoted per position and per colour.
- Moisture-Wicking Finish — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyethylene (PE)
- Construction sample with placement printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pattern matching across the fold and the tip.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your tie & accessory programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
