Case Study: Custom Nylon Webbing for a Pet Product Brand in Ireland
Source:Festival Wristbands Badges /
Time:2026-09-18
Nylon Webbing for a Pet Product Brand in Ireland
A Pet Product Brand approached us with a nylon webbing requirement for the Ireland market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- A spec that lived in an email instead of a tech pack
- Shrinkage that only showed up after the first wash
What we specified
| Item | Nylon Webbing |
|---|---|
| Client type | A Pet Product Brand |
| Market | Ireland |
| Order volume | 100,000 pieces across 4 specifications |
| Base material | PU Leather |
| Standard size | 32 mm Width |
| Finish | UV Printing |
| Sampling rounds | 3 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | Bluesign |
How it was resolved
- We rebuilt the specification around PU Leather and locked the tolerance before bulk.
- The finish was moved to Matte Black Coating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 100,000 pieces delivered inside the 6-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
