Case Study: Custom Nylon Zipper for a Yacht Interior Studio in Turkey
Source:Sheer Organza Ribbon /
Time:2026-09-18
Nylon Zipper for a Yacht Interior Studio in Turkey
A Yacht Interior Studio approached us with a nylon zipper requirement for the Turkey market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shade drift between the approved lab dip and the bulk lot
- A trim that passed sampling but failed in-line because it was never cycle tested
- MOQ that was quoted per colourway rather than per style
What we specified
| Item | Nylon Zipper |
|---|---|
| Client type | A Yacht Interior Studio |
| Market | Turkey |
| Order volume | 2,000 pieces across 6 specifications |
| Base material | Neoprene |
| Standard size | 20 mm Width |
| Finish | UV Printing |
| Sampling rounds | 2 |
| Delivery window | 4 weeks from PO to ex-factory |
| Compliance | GB 18401 |
How it was resolved
- We rebuilt the specification around Neoprene and locked the tolerance before bulk.
- The finish was moved to Silicone Wash Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 2,000 pieces delivered inside the 4-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
