Case Study: Custom Corduroy Fabric for a Car Interior Supplier in France
Source:Handcrafted Wax Warmers /
Time:2026-09-18
Corduroy Fabric for a Car Interior Supplier in France
A Car Interior Supplier approached us with a corduroy fabric requirement for the France market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- MOQ that was quoted per colourway rather than per style
- Shrinkage that only showed up after the first wash
- An interlining that bubbled after the first press
What we specified
| Item | Corduroy Fabric |
|---|---|
| Client type | A Car Interior Supplier |
| Market | France |
| Order volume | 20,000 pieces across 2 specifications |
| Base material | Nylon |
| Standard size | 360 gsm |
| Finish | Silicone Wash Finish |
| Sampling rounds | 3 |
| Delivery window | 5 weeks from PO to ex-factory |
| Compliance | GB 18401 |
How it was resolved
- We rebuilt the specification around Nylon and locked the tolerance before bulk.
- The finish was moved to Rainbow Iridescent Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 5-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
