Case Study: Custom Embroidered Patch for a Workwear Distributor in Chile

Embroidered Patch for a Workwear Distributor in Chile

A Workwear Distributor approached us with a embroidered patch requirement for the Chile market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• Shade drift between the approved lab dip and the bulk lot
• Cartons packed to the factory ratio instead of the buyer's size ratio
• A spec that lived in an email instead of a tech pack

What we specified

How it was resolved

1. We rebuilt the specification around Polyester and locked the tolerance before bulk.
2. The finish was moved to Nickel-Free Electroplating after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 5,000 pieces delivered inside the 4-week window.
• Unit cost held within 2.0% of the original quotation.
• Inspection-related rejection stayed under 0.5%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.

Planning something similar?

If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.