Case Study: Custom Bullion Patch for a Sportswear Brand in Morocco
Source:Die Cut Matte Stickers /
Time:2026-09-18
Bullion Patch for a Sportswear Brand in Morocco
A Sportswear Brand approached us with a bullion patch requirement for the Morocco market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Lead time quoted without the plating or dyeing sub-process
- Cartons packed to the factory ratio instead of the buyer's size ratio
- Elastic that lost recovery after three washes
What we specified
| Item | Bullion Patch |
|---|---|
| Client type | A Sportswear Brand |
| Market | Morocco |
| Order volume | 100,000 pieces across 2 specifications |
| Base material | Ceramic |
| Standard size | 10# Gauge |
| Finish | Sandblasted Finish |
| Sampling rounds | 2 |
| Delivery window | 4 weeks from PO to ex-factory |
| Compliance | GRS |
How it was resolved
- We rebuilt the specification around Ceramic and locked the tolerance before bulk.
- The finish was moved to Glossy Enamel Coating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 100,000 pieces delivered inside the 4-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
