Case Study: Custom Rib Knit Fabric for a Sportswear Brand in the Netherlands

Rib Knit Fabric for a Sportswear Brand in the Netherlands

A Sportswear Brand approached us with a rib knit fabric requirement for the the Netherlands market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• A trim that passed sampling but failed in-line because it was never cycle tested
• MOQ that was quoted per colourway rather than per style
• Lead time quoted without the plating or dyeing sub-process

What we specified

How it was resolved

1. We rebuilt the specification around Brass and locked the tolerance before bulk.
2. The finish was moved to UV Printing after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 2,000 pieces delivered inside the 6-week window.
• Unit cost held within 1.5% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.

Planning something similar?

If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.