Case Study: Custom Bonded Fabric for a Bag and Luggage Maker in Poland
Source:PET Label Stickers /
Time:2026-09-18
Bonded Fabric for a Bag and Luggage Maker in Poland
A Bag and Luggage Maker approached us with a bonded fabric requirement for the Poland market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shrinkage that only showed up after the first wash
- MOQ that was quoted per colourway rather than per style
- A spec that lived in an email instead of a tech pack
What we specified
| Item | Bonded Fabric |
|---|---|
| Client type | A Bag and Luggage Maker |
| Market | Poland |
| Order volume | 20,000 pieces across 2 specifications |
| Base material | POM Plastic |
| Standard size | 140 gsm |
| Finish | Rose Gold Plating |
| Sampling rounds | 4 |
| Delivery window | 5 weeks from PO to ex-factory |
| Compliance | GRS |
How it was resolved
- We rebuilt the specification around POM Plastic and locked the tolerance before bulk.
- The finish was moved to Sandblasted Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 5-week window.
- Unit cost held within 1.5% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
