Case Study: Custom French Terry Fabric for a Denim Manufacturer in Mexico

French Terry Fabric for a Denim Manufacturer in Mexico

A Denim Manufacturer approached us with a french terry fabric requirement for the Mexico market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• A spec that lived in an email instead of a tech pack
• Shade drift between the approved lab dip and the bulk lot
• A compliance document that arrived after the goods were already shipped

What we specified

How it was resolved

1. We rebuilt the specification around Bamboo and locked the tolerance before bulk.
2. The finish was moved to Silicone Wash Finish after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 50,000 pieces delivered inside the 6-week window.
• Unit cost held within 4.5% of the original quotation.
• Inspection-related rejection stayed under 1.5%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.