Case Study: Custom Hook and Loop Tape for a Sportswear Brand in Thailand

Hook and Loop Tape for a Sportswear Brand in Thailand

A Sportswear Brand approached us with a hook and loop tape requirement for the Thailand market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• Lead time quoted without the plating or dyeing sub-process
• A compliance document that arrived after the goods were already shipped
• A trim that passed sampling but failed in-line because it was never cycle tested

What we specified

How it was resolved

1. We rebuilt the specification around Silicone and locked the tolerance before bulk.
2. The finish was moved to Anodised Finish after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 20,000 pieces delivered inside the 10-week window.
• Unit cost held within 1.5% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.