Case Study: Custom Knitted Elastic for a Bag and Luggage Maker in Malaysia

Knitted Elastic for a Bag and Luggage Maker in Malaysia

A Bag and Luggage Maker approached us with a knitted elastic requirement for the Malaysia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• MOQ that was quoted per colourway rather than per style
• A compliance document that arrived after the goods were already shipped
• A trim that passed sampling but failed in-line because it was never cycle tested

What we specified

How it was resolved

1. We rebuilt the specification around Stainless Steel and locked the tolerance before bulk.
2. The finish was moved to UV Printing after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 50,000 pieces delivered inside the 10-week window.
• Unit cost held within 1.5% of the original quotation.
• Inspection-related rejection stayed under 1.5%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.

Planning something similar?

If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.