Case Study: Custom Bullion Patch for a Home Textile Brand in Malaysia
Source:Mixed Floral Arrangements /
Time:2026-09-18
Bullion Patch for a Home Textile Brand in Malaysia
A Home Textile Brand approached us with a bullion patch requirement for the Malaysia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A spec that lived in an email instead of a tech pack
- MOQ that was quoted per colourway rather than per style
- A trim that passed sampling but failed in-line because it was never cycle tested
What we specified
| Item | Bullion Patch |
|---|---|
| Client type | A Home Textile Brand |
| Market | Malaysia |
| Order volume | 5,000 pieces across 4 specifications |
| Base material | Cotton |
| Standard size | 38 mm Width |
| Finish | Glossy Enamel Coating |
| Sampling rounds | 4 |
| Delivery window | 5 weeks from PO to ex-factory |
| Compliance | EN 71-3 |
How it was resolved
- We rebuilt the specification around Cotton and locked the tolerance before bulk.
- The finish was moved to Mercerised Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 5,000 pieces delivered inside the 5-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
