Case Study: Custom Sleeve Head for a Bag and Luggage Maker in Indonesia
Source:Sheer Organza Ribbon /
Time:2026-09-18
Sleeve Head for a Bag and Luggage Maker in Indonesia
A Bag and Luggage Maker approached us with a sleeve head requirement for the Indonesia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shade drift between the approved lab dip and the bulk lot
- Shrinkage that only showed up after the first wash
- MOQ that was quoted per colourway rather than per style
What we specified
| Item | Sleeve Head |
|---|---|
| Client type | A Bag and Luggage Maker |
| Market | Indonesia |
| Order volume | 20,000 pieces across 6 specifications |
| Base material | Cotton |
| Standard size | 50 mm Width |
| Finish | Yarn-Dyed Finish |
| Sampling rounds | 4 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | AATCC Test Methods |
How it was resolved
- We rebuilt the specification around Cotton and locked the tolerance before bulk.
- The finish was moved to Matte Black Coating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 8-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
