Case Study: Custom Printed Ribbon for a Hotel Group in Morocco
Source:Military Service Badges /
Time:2026-09-18
Printed Ribbon for a Hotel Group in Morocco
A Hotel Group approached us with a printed ribbon requirement for the Morocco market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A zipper puller that broke under pull test at the warehouse
- A spec that lived in an email instead of a tech pack
- A trim that passed sampling but failed in-line because it was never cycle tested
What we specified
| Item | Printed Ribbon |
|---|---|
| Client type | A Hotel Group |
| Market | Morocco |
| Order volume | 2,000 pieces across 3 specifications |
| Base material | Silicone |
| Standard size | 25 mm Width |
| Finish | Brushed Silver Finish |
| Sampling rounds | 4 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | AATCC Test Methods |
How it was resolved
- We rebuilt the specification around Silicone and locked the tolerance before bulk.
- The finish was moved to Glossy Enamel Coating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 2,000 pieces delivered inside the 6-week window.
- Unit cost held within 1.5% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
