Case Study: Custom Nylon Taffeta Fabric for a Lingerie Specialist in Argentina

Nylon Taffeta Fabric for a Lingerie Specialist in Argentina

A Lingerie Specialist approached us with a nylon taffeta fabric requirement for the Argentina market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• A trim that passed sampling but failed in-line because it was never cycle tested
• Reorders that quietly changed supplier and changed the hand feel
• An interlining that bubbled after the first press

What we specified

How it was resolved

1. We rebuilt the specification around Acrylic and locked the tolerance before bulk.
2. The finish was moved to UV Printing after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 50,000 pieces delivered inside the 5-week window.
• Unit cost held within 2.0% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.