Case Study: Custom Viscose Fabric for a Footwear Factory in Argentina
Source:Healing Crystal Keyrings /
Time:2026-09-18
Viscose Fabric for a Footwear Factory in Argentina
A Footwear Factory approached us with a viscose fabric requirement for the Argentina market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Cartons packed to the factory ratio instead of the buyer's size ratio
- Elastic that lost recovery after three washes
- A zipper puller that broke under pull test at the warehouse
What we specified
| Item | Viscose Fabric |
|---|---|
| Client type | A Footwear Factory |
| Market | Argentina |
| Order volume | 5,000 pieces across 2 specifications |
| Base material | Nylon |
| Standard size | 180 gsm |
| Finish | Silicone Wash Finish |
| Sampling rounds | 4 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | Sedex SMETA |
How it was resolved
- We rebuilt the specification around Nylon and locked the tolerance before bulk.
- The finish was moved to Laser Engraved Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 5,000 pieces delivered inside the 10-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
