Case Study: Custom Polyester Spandex Fabric for a Medical Textile Buyer in Nigeria
Source:Long Hair Weave/Weft /
Time:2026-09-18
Polyester Spandex Fabric for a Medical Textile Buyer in Nigeria
A Medical Textile Buyer approached us with a polyester spandex fabric requirement for the Nigeria market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Cartons packed to the factory ratio instead of the buyer's size ratio
- A zipper puller that broke under pull test at the warehouse
- Elastic that lost recovery after three washes
What we specified
| Item | Polyester Spandex Fabric |
|---|---|
| Client type | A Medical Textile Buyer |
| Market | Nigeria |
| Order volume | 2,000 pieces across 4 specifications |
| Base material | Polyester |
| Standard size | 160 gsm |
| Finish | Piece-Dyed Finish |
| Sampling rounds | 3 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | CPSIA |
How it was resolved
- We rebuilt the specification around Polyester and locked the tolerance before bulk.
- The finish was moved to Sandblasted Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 2,000 pieces delivered inside the 8-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
