Case Study: Custom Woven Hang Tag for a Hotel Group in Portugal
Source:Boho Feather Hairbands /
Time:2026-09-18
Woven Hang Tag for a Hotel Group in Portugal
A Hotel Group approached us with a woven hang tag requirement for the Portugal market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- A trim that passed sampling but failed in-line because it was never cycle tested
- Shade drift between the approved lab dip and the bulk lot
What we specified
| Item | Woven Hang Tag |
|---|---|
| Client type | A Hotel Group |
| Market | Portugal |
| Order volume | 100,000 pieces across 6 specifications |
| Base material | POM Plastic |
| Standard size | 25 mm Width |
| Finish | Silicone Wash Finish |
| Sampling rounds | 2 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | JIS L Standards |
How it was resolved
- We rebuilt the specification around POM Plastic and locked the tolerance before bulk.
- The finish was moved to Black Nickel Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 100,000 pieces delivered inside the 8-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
