Case Study: Custom Wooden Button for a Uniform Supplier in Thailand
Source:Magnetic Self-Stick Photo Album /
Time:2026-09-18
Wooden Button for a Uniform Supplier in Thailand
A Uniform Supplier approached us with a wooden button requirement for the Thailand market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A spec that lived in an email instead of a tech pack
- Shade drift between the approved lab dip and the bulk lot
- Elastic that lost recovery after three washes
What we specified
| Item | Wooden Button |
|---|---|
| Client type | A Uniform Supplier |
| Market | Thailand |
| Order volume | 100,000 pieces across 3 specifications |
| Base material | Rubber |
| Standard size | 10# Gauge |
| Finish | Mercerised Finish |
| Sampling rounds | 3 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | ISO 105 Colour Fastness |
How it was resolved
- We rebuilt the specification around Rubber and locked the tolerance before bulk.
- The finish was moved to UV Printing after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 100,000 pieces delivered inside the 10-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
