Case Study: Custom Polyester Spandex Fabric for a Sportswear Brand in Qatar

Polyester Spandex Fabric for a Sportswear Brand in Qatar

A Sportswear Brand approached us with a polyester spandex fabric requirement for the Qatar market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• Lead time quoted without the plating or dyeing sub-process
• Shade drift between the approved lab dip and the bulk lot
• MOQ that was quoted per colourway rather than per style

What we specified

How it was resolved

1. We rebuilt the specification around Polyester and locked the tolerance before bulk.
2. The finish was moved to Mercerised Finish after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 100,000 pieces delivered inside the 10-week window.
• Unit cost held within 3.0% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.