Case Study: Custom Hang Tag for a Home Textile Brand in the Philippines

Hang Tag for a Home Textile Brand in the Philippines

A Home Textile Brand approached us with a hang tag requirement for the the Philippines market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• A compliance document that arrived after the goods were already shipped
• Shrinkage that only showed up after the first wash
• Elastic that lost recovery after three washes

What we specified

How it was resolved

1. We rebuilt the specification around Brass and locked the tolerance before bulk.
2. The finish was moved to Nickel-Free Electroplating after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 5,000 pieces delivered inside the 10-week window.
• Unit cost held within 1.5% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.