Case Study: Custom Seersucker Fabric for a Home Textile Brand in Brazil
Source:Antique Hand Painted Screen /
Time:2026-09-18
Seersucker Fabric for a Home Textile Brand in Brazil
A Home Textile Brand approached us with a seersucker fabric requirement for the Brazil market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shade drift between the approved lab dip and the bulk lot
- An interlining that bubbled after the first press
- A spec that lived in an email instead of a tech pack
What we specified
| Item | Seersucker Fabric |
|---|---|
| Client type | A Home Textile Brand |
| Market | Brazil |
| Order volume | 20,000 pieces across 6 specifications |
| Base material | TPU |
| Standard size | 80 gsm |
| Finish | Pearlescent Coating |
| Sampling rounds | 2 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | California Prop 65 |
How it was resolved
- We rebuilt the specification around TPU and locked the tolerance before bulk.
- The finish was moved to Gunmetal Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 10-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
